Hammarkvarn med kylning och uppvärmning

Empel HHM 600/30

For sale is a hammer mill for the production of powdered goods in the spice / herb / food industry! Structure: 1 piece hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the rear wall 2 pieces flushing ports into the rotating part of the mill Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord Inside the housing a sieve basket with crusher, from the outside the sieve can fix Bottom centered an outlet with appropriate connection flanges Motor 400/680 volts; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. sieve according to your choice 3 pcs. The rotor is also in V2A design, (beater with 96 platelets) Rotor can be turned 180°, in addition, the beater platelets can be turned 1 time. For this purpose, we recommend balancing after turning. 1 piece feeding screw for hammer mill with gear motor with 1,2 kW screw equipped with two cleaning balls at the hinged lid lid is equipped with lid switch and tumbler insertion hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for infinitely variable speed control speed display beater 3 PTC thermistor sensors as protection against overheating of the motor. Sensor for vibration protection Integration of cover switches Switch cabinet in stainless steel Emergency stop, main switch 1 piece Cooling or heating jacket on the rear wall of the mill housing Welded seams pickled and glass beads blasted on the outside. Steel parts, such as motor and motor console primed and painted according to RAL 1013. Attention: It must be ensured that no metal parts enter the mill! Total price of the plant described above price 145.000 €


superstructure:
1 piece
Hammer mill
30 kW three-phase motor with reinforced bearings.
Bearing housing screwed to the console.
Drive shaft driven by V-belt.
Iijdpfxjpz H D Ij Abpjk
Sealing of the shaft passage to the housing via wiper and shaft sealing ring.
In the back wall 2 pieces of flushing connections into the rotating part of the mill.
Four swinging feet
Front door with large hinged door with four clamps and lid switch with tumbler.
In the lid an O-ring groove with silicone round cord
In the inside of the housing a sieve basket with crusher, from the outside the sieve can be fixed
At the bottom in the middle an outlet with a corresponding connection flange.
Motor 400/680 Volt; IP 54
2900 rpm at 50 Hz with 3 PTC thermistors.
Housing made of stainless steel (V2A) 1.4301
Drive bracket made of painted steel
4 pcs. screens of your choice
3 pieces rotors
The rotor is also in V2A design,
(beater with 96 plates)
rotor can be rotated by 180
the beater plates can be turned 1 time.
be turned.
For this purpose, we recommend balancing after turning.
1 piece
Feeding screw for hammer mill
with gear motor with 1,2 kW
Screw equipped with two cleaning balls on hinged lid
lid is equipped with lid switch and tumbler
feeding hopper at the screw in rectangular design
1 piece switch cabinet
equipped with two frequency converters for stepless speed control
speed indicator beater

Annonsen översattes automatiskt och vissa översättningsfel kan ha inträffat.